How to disinfect BDF assembled water tank?

Preparation of tools before disinfection of BDF assembled water tank: work clothes, broom, nylon brush, shovel, water cannon, disinfectant, safety lighting, water pump, blower, mask, glasses, etc.

How to disinfect BDF assembled water tank?

Preparation of tools before disinfection of BDF assembled water tank: work clothes, broom, nylon brush, shovel, water cannon, disinfectant, safety lighting, water pump, blower, mask, glasses, etc.

(1) Power supply: The working power supply of BDF assembled water tank should be changed to a safe voltage below 36V. The working lighting, flashlight and emergency light should use an isolation transformer. The three-phase water pump should be equipped with a leakage start device.

(2) Lack of oxygen; some swimming pools are closed for a long time and the air circulation is not smooth. A blower can be connected to the opening of the BDF assembled water tank to blow air for about 3 hours. BDF assembled water tank and then select the following test: Put a burning candle into the pool. If it does not go out, it means that the swimming pool is not lacking oxygen. Otherwise, ventilation must be continued until there is no problem.

(2) Pour an appropriate amount of tap water into the BDF assembled water tank, repeatedly wash the above positions with clean water, and rinse the disinfectant solution.

(3) Water filling: After the BDF assembled water tank is cleaned, open the gate to fill the water tank (tank) with water to reach the calibrated water level and lock it.

Note that during the cleaning of the BDF assembled water tank, the disinfection personnel must wear protective glasses and masks. If they feel uncomfortable in the BDF assembled water tank, causing dizziness, eye pain, and heart tightness, they should leave the water tank immediately, rinse their eyes with clean water, and breathe fresh air to recover. When removing debris and cleaning the pool, use a shovel to remove sediment and various sediments in the pool, and then use a broom or nylon brush to repeatedly scrub from the top of the BDF assembled water tank and the bottom of a fiberglass high-level water tank around the BDF assembled water tank. After brushing your teeth, rinse with high-pressure water to drain out the dirty water.